FB YouTube Instagram

Ford Ranger PX2 Switch Fascia

Ford Ranger PX2 Switch Fascia
$155.00

This replaces the existing fascia that is located in the central lower dash that has the 2 12v outlets and is compatible with all 37 PX MK2 models and the 3 Everest models and has an Australian design patent.

The fascia is a direct replacement injected moulded ABS/PC panel, with zero modification to the existing surrounding console, maintaining the OEM look of the vehicle. It will accommodate 3 standard OEM style switches.

The fascia finish is matte black, installation takes approximately 30 minutes and only requires a 7mm ring spanner and medium screwdriver as the surrounding panels simply pull off (a little force is required as each panel has at least 6 retaining clips).
The fascia relocates in the exact same mounting points as the original so no additional fixtures or adhesives are required.
The 2 existing 12v outlets will need to be removed from the original fascia and refitted into the new fascia that incorporates the switches. This is where the medium screwdriver is required.

A single switch (CBSWTY2) and two switch blanks are provided with the fascia; the blanks have been designed to accommodate the REDARC® Tow-Pro™ remote brake controller. On the back of the blanks are two corresponding indents to aid in drilling the 2 required holes, extra blanks are available.
When fitting the Tow-Pro™ remote brake controller it is recommended purchasing the Lightforce network cable (P#CBRJ45) as the cable supplied in the original kit will not fit due to space restrictions within the console.

Key Features: