This wheel has a center cap OD of 62.7mm, which is larger than the previously used 55.5mm OD center caps.
IMPORTANT FITMENT NOTES FOR WHEEL AND TYRE SHOPS!!!!
Wheel Weight Clearance:
Due to the design of the wheel barrel/drop well on the Pintler combined with our high offset and the JL’s large brakes, clearance for stick-on weights inside the wheel is VERY tight. Standard thin .25oz stick-on weights clear the brake package. Larger .5oz and 1oz weights do not.
Powder Coating Warning:
As a general safety precaution, AEV does not recommend nor approve of re-powdercoating these wheels. The heat range and duration of the powder coating process (normally 210deg C) may overlap the heat treating and aging of cast or forged aluminum wheels. For this reason, re-powdercoated wheels will not be covered under AEV’s lifetime structural warranty. All repairs and/or color changes should utilize automotive type liquid paint aka 2pak spraying via a professional paint shop.
The AEV Pintler wheel combines timeless 5 spoke styling with the innovative features and off-road strength that you’ve come to expect from AEV. However, this is not just another one-size-fits-all aftermarket Jeep wheel.
AEV has carefully designed the Pintler wheel specifically for the newest JL Wrangler because despite sharing the same DNA as the Jeep JK Wrangler, many aspects of the latest generation Wrangler are quite different, so simply re-purposing a JK wheel was not the best solution. The JL Pintler’s unique offset of +25mm, works perfectly with the various OE fender flare variants and provides the optimal balance of tire clearance for 33’s 35’s, scrub radius and handling. Additionally, this wheel features a larger center cap bore (62.77mm) for compatibility with the Jeep JL Wrangler’s OE backup camera and resized pockets for the larger factory lug nuts as the JL uses 14mm studs compared to the previous 1/2″ found on the JK.
Available in either an Onyx or Matte Black finish.
• JL Wrangler specific fitment using stock OE wheel nuts
• Compatible with Tire Pressure Monitoring System (TPMS)
• Accepts OE lug nuts without the need to use thin wall socket
• Compatible with the OE backup camera
• Recessed valve stem for added protection
• A356 T6 cast aluminum construction
• Tested to stringent SAE J2530 standards
• Molded AEV Center Cap included
• Lifetime structural warranty (conditions apply for Australia)
For warranty information, please visit https://murchisonproducts.com.au/warranty-policy/